Liquid filling machines fill a variety of bottles. ebay store Twitter Facebook

Labeling Machines at Reasonable Prices

Phone: 336-683-9834           Email: contact@liquid-filling.com

Labeling for Liquid Filling Machines

Semi-Automatic Round Product Label Applicator

This uniquely designed applicator will accommodate a full range of round products, from 1/4" to 6" diameter, without the need for costly attachments or modifications. The 'open carriage' design allows the applicator to apply labels to products of virtually any length using on standard unit.

Most tapered products can also be accommodated on our standard unit.

Price: $4,200.00

Labeling machine.

Bottling machine labels

 

Key Benefits:

  • Accepts most tapered products

  • Supports a 12" roll diameter

  • Built with a solid steel frame

  • Open carriage allows easy removal of labeled parts

Optional Accessories:

  • Clear Label Photo Cell

  • Hot Stamp Imprinter

  • Label Counter

  • No Air Required System

  • 7" Wide Label Kit

Semi-automatic All Electric Round Product Labeler, bottle wrap labeling machine

Will label virtually any round product. Simply press the foot switch and labels up to 5” wide can be applied. Products are quickly loaded into the applicator with the unique open carriage design. The top wipe down brush ensures that the labels are fully applied to the product. The vertical label path allows the operator to visually inspect the labels prior to application. The open bottle support can be changed from one size to the next in seconds without the use of tools.

Price Starting at: $2599.00

Key Benefits:

  • Solid State Electronics

  • Fully adjustable unwind tension

  • Scrap rewind for quick start and removal of waste lines

  • Durable all steel frame with powder coat finish

  • Foot switch activated

  • Photo cell label sensor

Available Options:

  • Clear Label Photo Cell

Specifications:

  • Unit Dimensions: W-15" X H-30" X L-15"

  • Shipping Weight: 45 pounds

Labels for a bottling machine

Manual Round or Bottle Wrap Labeler Labeling Machine

With just the turn of a handle, labels up to 5” wide can be applied. Products are quickly loaded into the applicator with the unique open design. The top wipe down brush ensures that the labels are fully applied to the product. With a vertical label path that allows the operator to visually inspect the labels prior to application. The open bottle support can be changed from one size to the next in seconds without the use of tools.

Price: $1595

Standard machine, shipping not included in price.

Standard Features:

  • Fully adjustable unwind tension

  • Scrap rewind for quick start and removal of waste liner

  • Durable all steel frame with powder coat finish

Physical Features:

Unit Dimensions: W-12” x H-25” x L-15”

Shipping Weight: 40 pounds

Specifications:

Product Size: 1/4” to 5”

Minimum Label Size: 1” x 1”

Maximum Label Width: 5”

Maximum Roll Diameter: 12”

Core Size Diameter: 1” or 3”

Bottling machine labels

Semi-automatic All Electric Round Product Labeler, bottle wrap labeling machine

This very affordable applicator provides a reliable, industrial grade labeling system that is very simple to operate. Its design and operation draws on over 30 years of dedicated label dispenser experience.

Will label flat sided bottles, boxes, containers, etc.

There is an extra charges to make jigs to hold your products in position for labeling.

Key Benefits

  • Standard Photo Eye

  • Built with a Solid Steel Frame

  • Solid State Electronics

Specifications

  • Accuracy +/- 1/32"

  • Minimum Label Size: 1/2" x 1/2"

  • Maximum Label Size: 5" x 5"

  • Maximum Roll Diameter: 12"

  • Core Size: 3"

Optional Accessories

  • Hot Stamp Imprinter

  • Custom Vacuum Pads

  • Universal Product Fixture

  • Label Counter

  • Extended Stroke Tamp Cylinder

  • Clear Label Photo Cell

  • Custom Product Fixture

  • 7" Wide Label Kit

Gravity filling labels

Kinex Cappers

We distribute Kinex Cappers, they specialize in the manufacture of semi-automatic and hand held capping machines and bottle capers that tighten screw and lug type caps from 10 mm to 130 mm. With this specific focus they have developed the most extensive and complete line of semi-automatic and hand held capping machines in the industry. All of their capping machines and accessories are ready for immediate shipment.

These bottle cappers tighten caps constructed of all materials, including tamper evident caps, child resistant caps, metal caps, and caps requiring induction seal. Our machines work with glass, metal and plastic containers, including PP, PVC, HDPE, PET, PP and PVC.

Below are the semi-automatic and manual or hand held capping machines offered that will work for most applications:

  • SA™ Bench Top Capping Machine

  • Cap-Rite™ Manual Capper

  • PS™ Pneumatic Bottle Capper

  • ES™ Electric Bottle Capper

  • LS™ Pneumatic Bottle Capper

  • Kinetic™ Bottle Capper

Three of these capping machines have been specifically engineered to work with small caps; they are listed below:

SA-1000 Bench-Top Capping Machine - Our 1000 Bench-Top Capping Machine has been specifically designed to tighten small caps. With a torque output as low as 2 inch.lbs, the SA-1000 provides excellent torque accuracy and repeatability for small cap applications.

PS-100 - A pneumatic hand held capper that is ideal for use with small caps. Featuring a low torque range starting at only 2 inch.lbs, the PS-100 delivers outstanding repeatable torque accuracy on caps ranging from 10-41 mm.

ES-100 - An electric hand held capper that is ideal for use with small caps. With a low torque range of 2-14 inch.lbs, the ES-100 delivers outstanding repeatable torque accuracy on caps ranging from 10-24 mm.

The SA-2000

SA-2000 Series Bench-Top Capping Machine - Our 2000 Series Bench-Top Capping Machine has been specifically designed to tighten large caps. The power unit incorporates a powerful pneumatic motor coupled with a high gear ratio and low RPM that produces the output torque necessary to close large caps with ease and precision. The SA 2000 not only has the power to tighten large caps, but it does so with very high torque accuracy and precision.

The SA Capping Machine is designed to eliminate the strain and fatigue associated with tightening large caps. The operator places the container to be capped into the V-block (bottle centering device) and onto the Anti-Rotation Base of the SA Capping Machine. The Anti-Rotation Base has a very high friction rubber surface which helps prevent the container from rotating while it is being capped. This makes holding the container while it is being capped strain free. The result is a machine that is very ergonomic.

The PS-300

PS-300 Power Cap™ - A pneumatic hand held capper that is ideal for use with large caps. The PS-300 has a wide torque range, from 14-110 inch.lbs. It has the power to deal with your large caps, and still tighten caps as small as 22 mm. We can modify a PS-300 to work with smaller cap ranges and lower torque ranges as well.

The PS-300 Power Cap™ should be paired with our KST-100 when the machine will be used to tighten large caps. Large caps require a lot of application torque to close properly. A hand held capping machine becomes very difficult and fatiguing to hold in these high torque applications. The Kinex Torque Stabilizing Arm (KST-100) holds the PS-300 still so the operator does not have to. It eliminates 100% of the twisting torque generated during the capping process, protecting the operators fingers, hands, wrists and arms from repetitive strain.

Kinetic Series Cappers

Kinetic Series Cappers - Our SWDP-16 and SWTE-16 Two Speed Kinetic Cappers are very well suited to tighten large caps. Powered by a fractional horsepower AC motor, these capping machines are strong and fast, delivering a torque range of 4-100 inch.lbs.

Kinetic Series Cappers are also a very ergonomic solution for large caps as the twisting torque generated during the capping process with large caps is absorbed through the suspension system of the machine, and not transferred to the operator.

While Kinetic Series Capping Machines are very fast and very ergonomic, they do not offer the excellent torque accuracy and repeatability of the SA-2000 and PS-300. If all you need is a good tight cap, the Kinetic Series is an excellent option for you. If your application calls for greater torque accuracy and you need to meet specific torque specifications, the SA-2000 and PS-300 are the superior choice.

LS 100

The LS™ 100 cap tightener, our least expensive bottle capper, tightens screw and lug caps from 24 mm to 83 mm in diameter. This capper features an external torque dial that makes changing the torque fast and simple with consistent results.

How It works

LS™ capping machines operate in the following way. The operator lowers the chuck onto the cap to be tightened. The operator then depresses the lever with their thumb or fingers to start the capping machine which will quickly tighten the cap onto the container. When the cap reaches the pre set torque, the operator will hear the clutch slipping and will see the chuck has stopped rotating on top of the cap. This signals the operator to release the lever and move on to the next cap.

While the LS-100 is a good capping machine that is far superior to others in its price class, it does not provide the excellent torque accuracy as well as the many ergonomic advantages that the PS Series Pneumatic hand held capping machines offer.

Capping machine features:

  • Tighten screw and lug type caps from 24mm- 83mm.

  • Good repeatable torque ranging from 14-70 inch.lbs.

  • Lever start

  • Adjustable clutch with external torque adjustment dial

LS Capping Machines come ready to operate. The package price includes an LS Capping Machine with a capper balancer, coil air hose, anti-rotation mat one chuck, and your choice of four urethane or white rubber liners (chuck inserts).

Operating Features:

  • External Torque adjustment dial - makes adjusting torque simple.

  • Lever Start

  • Tightens caps from 24mm to 83mm

  • Torque range from 14 - 70 inch.lbs

  • Good torque accuracy

  • Capper/Decapper

  • Easy to setup, easy to use

  • Quick change chuck

  • Quiet operation

The PST-100 Pneumatic Capper Stand (visit https://www.kinexcappers.com/stand-pst100.htm) can be purchased as an option. The column of the stand is 43 inches high and the arm is 30 inches long. The arm of the stand can swivel 360 degrees allowing for a large potential work area for your capping machine. The stand also makes for easy mounting and organizing of the capping machine, capper balancer and air hoses.

The KBC 1000 Bench Clamp (visit https://www.kinexcappers.com/kbc-bench-clamp.htm) can be purchased as an option. The KBC-1000 Bench Clamp allows you to fasten the base of the PST-100 Stand onto your work surface without screwing the base of the stand directly into your table.

 

LS™ 100 Kinex Capping Machine

Package Price - $590. Includes LS™ Capping Machine, capper balancer, coil air hose, anti-rotation mat, 1 chuck, and your choice of four urethane or white rubber liners.

Package price with stand - $790. Includes LS™ Capping Machine with PST-100 Pneumatic Capper Stand, capper balancer, coil air hose, anti-rotation mat, 1 chuck, and your choice of four urethane or white rubber liners.

Cap Range: 22mm - 83mm

Torque Range: 14 - 70 inch lbs.

Recommended Air Pressure: 90 psi

PST-100 Pneumatic Capper Stand Specifications:

  • Polished chrome finish

  • 43 inches high

  • 30 inch swivel boom

  • 3 inch square welded base

  • 4 Base mounting screws

  • Sliding Capper Positioner

  • Mounted quick-disconnect coupling

  • 12' coil air hose

  • 6 foot limp hose for hook-up to in-house air supply

  • Capper balancer included

 

Options Available:

KBC - 1000 Bench Clamp - The KBC-1000 Bench Clamp allows you to fasten the base of:

Cap Range
(in mm)

Chuck

Urethane Liner
55 Durometer

Urethane Liner
70 Durometer

Urethane Liner
80 Durometer

White Rubber
Liner

 

Part#

Price/Pc

Part #

Price/Pc

Part #

Price/Pc

Part #

Price/Pc

Part #

Price/Pc

10-15mm

C100

$52.00

L100B

$4.50

L100B-70

$4.50

L100B-80

$4.50

NA

NA

14-20mm

C104

$57.00

L104B

$4.75

L104B-70

$4.75

L104B-80

$4.75

L104A

$4.75

20-25mm

C111

$60.00

L111B

$5.25

L111B-70

$5.25

L111B-80

$5.25

L111A

$5.25

22-28mm

C118

$62.00

L118B

$5.50

L118B-70

$5.50

L118B-80

$5.50

L118A

$5.50

25-33mm

C122

$74.00

L122B

$6.00

L122B-70

$6.00

L122B-80

$6.00

L122A

$6.00

32-40mm

C127

$84.00

L127B

$6.25

L127B-70

$6.25

L127B-80

$6.25

L127A

$6.75

38-47mm

C134

$94.00

L134B

$6.75

L134B-70

$6.75

L134B-80

$6.75

L134A

$7.00

47-59mm

C139

$102.00

L139B

$7.50

L139B-70

$7.50

L139B-80

$7.50

L139A

$8.50

56-62mm

C143

$106.00

L143B

$8.50

L143B-70

$8.50

L143B-80

$8.50

L143A

$9.50

60-72mm

C148

$110.00

L148B

$9.50

L148B-70

$9.50

L148B-80

$9.50

L148A

$11.50

70-78mm

C154

$115.00

L154B

$9.75

L154B-70

$9.75

L154B-80

$9.75

L154A

$12.50

78-92mm

C158

$124.00

L158B

$10.50

L158B-70

$10.50

L158B-80

$10.50

L158A

$14.00

92-102mm

C162

$132.00

L162B

$10.75

L162B-70

$10.75

L162B-80

$10.75

NA

NA

100-110mm

C164

$136.00

L164B

$11.25

L164B-70

$11.25

L164B-80

$11.25

NA

NA

107-118mm

C165

$138.00

L165B

$11.50

L165B-70

$11.50

L165B-80

$11.50

NA

NA

115-130mm

C175

$148.00

L175B

$13.50

L175B-70

$13.50

L175B-80

$13.50

NA

NA

Irregular Caps? Our standard chucks ae built to handle irregular caps with no modification, and no additional charge. Our standard chucks accommodate: Plastic Disc Caps, Dropper Caps, Spout Caps, Dispensing Caps, Push-Pull Caps, Pour Spout Caps, Pull Spout Caps, Mist Spray Caps, Flip Top Caps, Over Caps, Sports Caps, and many more.

SA Bench Top Capping MachineKinex™ Bottle Capping Machine

This top-of-the-line capping machine features:

  • Tightens screw and lug type caps from 10mm - 130mm.

  • Exceptional ergonomics.

  • External torque adjustment dial

  • Excellent repeatable torque accuracy ranging from 2-125 inch.lbs.

SA™ Semi-Automatic Bench-Top Capping Machines were designed to eliminate the strain and fatigue associated with hand capping. Extremely ergonomic and comfortable, SA Bench-Top Capping Machines are very easy to use.

How It works

Simply place the bottle to be capped into the V-block on the base of the machine and depress the foot pedal. This activates the machine to bring the capping motor down onto the cap, tighten the cap to the pre-set torque, then lift the capping motor back to its initial position ready for the next container.

These Capping Machines feature an adjustable automatic-shut-off clutch, which offers excellent torque accuracy and repeatability. The clutch is easily adjusted by rotating an external dial with your fingers; the torque range is from 2 inch.lbs. - 125 inch.lbs. When the cap reaches the pre-set torque, the clutch signals the motor to shut off, and the machine lifts up off of the cap.

These Semi-Automatic Cappers are air operated. They include an integrated lubricator/filter/regulator to ensure the machine receives clean, well lubricated air at the correct air pressure.

Tighten small caps the SA 1000 Series Capping Machines can handle your small cap requirements, applying as little as 2 inch.lbs. of torque.

Tighten large caps with this extremely powerful motor and special gearing, our SA-2000 Series Capping Machines are designed to handle caps from 80 mm to 130 mm with ease.

Cap in a clean, sterile or controlled environment using a mechanical liner-less chuck.

Capping Machine for liquid filling.

Operating Features:

  • Tightens caps from 10mm to 130mm.

  • Torque range: 2 - 125 inch.lbs.

  • Capping speed - 30 caps per minute.

  • External torque adjustment dial.

  • Integrated lubricator/filter/regulator

  • Reversible - can be used as a de-capper

  • Easy to set up, easy to use.

  • No Tools Required! All adjustments are made by turning knobs and dials.

  • Quick change chuck

SA™ Semi Automatic Bench-Top Capping Machines come ready to operate. The price includes an SA™ Capping Machine with one chuck and your choice of four urethane or white rubber liners (chuck inserts).

Choosing the correct model:

  • SA-1000 - For small to medium size caps (cap range 10 - 33 mm),and bottles less than 11 inches tall.
  • SA-1010 - For small to medium size caps (cap range 10 - 33 mm), and bottles less than 17 inches tall.
  • SA-2000 - For medium to large size caps (cap range 18 - 130 mm), and bottles less than 11 inches tall.
  • SA-2010 - For medium to large size caps (cap range 18 -130 mm), and bottles less than 17 inches tall.

 

Model SA-1000 SA-1010 SA-2000 SA-2010
Price $1,925 $2,025 $1,975 $2,075
Cap Range(mm) 10-33 10-33 18-130 18-130
Torque Range (inch. lbs) 2-30 2-30 8-125 8-125
Max Bottle Height (inches) 11 17 11 17
Height (inches) 25.5 31.5 25.5 31.5
Width (inches) 10 10 10 10
Depth (inches) 13.375 13.375 13.375 13.375
Weight (lbs.) 25.6 27.1 26.3 27.8
Air Pressure (psi) 90-125 90-125 90-125 90-125
Air Consumption (cfm) 3.0 3.0 3.0 3.0

 

Chuck Selection Chart for SA Capping Machine

How to use the chuck selection chart

Measure the outside diameter of your cap and then use the chart below to determine the appropriate chuck and liner sizes for your cap.

Capping machine pieces.

Cap Range
(in mm)

Chuck

Urethane Liner
55 Durometer

Urethane Liner
70 Durometer

Urethane Liner
80 Durometer

White Rubber
Liner

 

Part#

Price/Pc

Part #

Price/Pc

Part #

Price/Pc

Part #

Price/Pc

Part #

Price/Pc

10-14mm

C100

$52.00

L100B

$4.50

L100B-70

$4.50

L100B-80

$4.50

NA

NA

14-18mm

C104

$57.00

L104B

$4.75

L104B-70

$4.75

L104B-80

$4.75

L104A

$4.75

18-24mm

C111

$60.00

L111B

$5.25

L111B-70

$5.25

L111B-80

$5.25

L111A

$5.25

21-26mm

C118

$62.00

L118B

$5.50

L118B-70

$5.50

L118B-80

$5.50

L118A

$5.50

25-31mm

C122

$74.00

L122B

$6.00

L122B-70

$6.00

L122B-80

$6.00

L122A

$6.00

31-38mm

C127

$84.00

L127B

$6.25

L127B-70

$6.25

L127B-80

$6.25

L127A

$6.75

38-46mm

C134

$94.00

L134B

$6.75

L134B-70

$6.75

L134B-80

$6.75

L134A

$7.00

46-56mm

C139

$102.00

L139B

$7.50

L139B-70

$7.50

L139B-80

$7.50

L139A

$8.50

54-61mm

C143

$106.00

L143B

$8.50

L143B-70

$8.50

L143B-80

$8.50

L143A

$9.50

61-70mm

C148

$110.00

L148B

$9.50

L148B-70

$9.50

L148B-80

$9.50

L148A

$11.50

68-76mm

C154

$115.00

L154B

$9.75

L154B-70

$9.75

L154B-80

$9.75

L154A

$12.50

76-89mm

C158

$124.00

L158B

$10.50

L158B-70

$10.50

L158B-80

$10.50

L158A

$14.00

89-99mm

C162

$132.00

L162B

$10.75

L162B-70

$10.75

L162B-80

$10.75

NA

NA

97-108mm

C164

$136.00

L164B

$11.25

L164B-70

$11.25

L164B-80

$11.25

NA

NA

107-117mm

C165

$138.00

L165B

$11.50

L165B-70

$11.50

L165B-80

$11.50

NA

NA

115-130mm

C175

$148.00

L175B

$13.50

L175B-70

$13.50

L175B-80

$13.50

NA

NA

 

Our top-of-the-line pneumatic cap tightener features:

  • Tighten screw and lug type caps from 10mm-130mm.

  • Precise repeatable torque accuracy ranging from 2 – 110 inch.lbs

  • Push to start

  • Auto-shutoff clutch for exceptional torque accuracy

  • External Torque adjustment dial.

  • Soft ergonomic grip for user

PS Bottle Cappers tighten screw and lug caps from 10 mm to 130 mm. They are easy to use and a good choice when torque accuracy and repeatability are crucial. The torque output is easily adjusted by turning an external torque dial with your fingers. PS Capping Machines run on compressed air at 90 psi; they are very quiet and comfortable to use.

PS capping machines are lightweight and include ergonomic features such as push to start and automatic shut off.

How It works

PS capping machines are very easy to use. The operator lowers the chuck onto the cap to be tightened. With a gentle push down (push to start-there are no levers to depress) the machine starts and tightens the cap in a fraction of a second. When the cap reaches the pre set torque, the machine automatically shuts off (auto-shut-off), signaling the operator to go to the next cap.

Our PS-100 can handle your small cap requirements, applying as little as 2 inch.lbs. of torque.

When we discuss small caps we are in general referring to caps from 10mm - 18mm in diameter. The appropriate torque range to tighten such small caps is usually between 2 inch.lbs and 12 inch.lbs. Small caps are most frequently found in the medical, pharmaceutical and biotechnology industries. Subject to greater regulation and extensive quality standards, these companies frequently require a capping machine which will deliver excellent repeatable torque accuracy on their caps and containers.

Operating Features:

  • Tightens caps from 10mm to 130mm

  • External Torque Adjustment Dial

  • Precise repeatable torque ranging from 2-110 inch.lbs

  • Can be used as a De-Capper

  • Easy to setup, easy to use

  • Quick change chuck

Ergonomic Features:

  • Push to Start

  • Automatic Shutoff

  • Quiet operation

  • Soft ergonomic grip

  • Compact Size

PS Capping Machines come ready to operate. The package price includes a PS Capping Machine with a capper balancer, coil air hose, anti-rotation mat, one chuck, and your choice of four urethane or white rubber liners (chuck inserts).

The PST-100 Pneumatic Capper Stand can be purchased as an option. The column of the stand is 43 inches high and the arm is 30 inches long. The arm of the stand can swivel 360 degrees allowing for a large potential work area for your capping machine. The stand also makes for easy mounting and organizing of the capping machine, capper balancer and air hoses.

The KBC 1000 Bench Clamp can be purchased as an option. The KBC-1000 Bench Clamp allows you to fasten the base of the PST-100 Stand onto your work surface without screwing the base of the stand directly into your table.

Package Price : $850

Package Price with Stand: $1,050

Model Cap Range Torque Range Recommended Air Pressure
PS-100 10mm-41mm 2 - 30 inch lbs.   90 psi
PS-200 15mm-83mm 8 - 70 inch lbs.   90 psi
PS-300 22mm-130mm 14 - 110 inch lbs.   90 psi

Package price - $850. Includes an PS Capping Machine with a capper balancer, coil air hose, anti-rotation mat, one chuck and your choice of four urethane or white rubber liners (chuck inserts).

Package price with Stand - $1,050. Includes an PS Capping Machine with PST-100 Pneumatic Capper Stand, capper balancer, coil air hose, anti-rotation mat, one chuck and your choice of four urethane or white rubber liners (chuck inserts).

PST-100 Pneumatic Capper Stand Specifications:

  • Polished chrome finish

  • 43 inches high

  • 30 inch swivel boom

  • 3 inch square welded base

  • 4 Base mounting screws

  • Sliding Capper Positioner

  • Mounted quick-disconnect coupling

  • 12" coil air hose

  • 6 foot limp hose for hook-up to in-house air supply

  • Cap balancer included

KBC - 1000 Bench Clamp - The KBC-1000 Bench Clamp allows you to fasten the base of the stand onto your work surface without screwing the base of the stand directly into your table.

Irregular Caps?

Our standard chucks are built to handle irregular caps with no modification, and no additional charge. Our standard chucks accommodate: Plastic Disc Caps, Dropper Caps, Spout Caps, Dispensing Caps, Push-Pull Caps, Pour Spout Caps, Pull Spout Caps, Mist Spray Caps, Flip Top Caps, Over Caps, Sports Caps, and many more.

Our manual cap tightener features:

Price $595 with custom chuck and anti-rotation mat.

This Manual Capper is intended for manufacturers with relatively low production runs that require a high level of certified torque accuracy. It is ideal for shippers of hazardous materials that need to comply with DOT regulations, as well as medical, pharmaceutical and biotechnology companies that need to comply with strict torque specifications.

The Cap-Rite is also a good choice for manufacturers that want to continue to manually tighten their caps but want to avoid product leakage and other quality problems that can result from inconsistent hand tightening.

The application torque of this Manual Capper is factory set and locked to your specification. Available torque settings are from 5 - 50 inch.lbs. The torque setting can be selected in 1 inch.lbs. increments.

The Manual Capper provides outstanding torque accuracy of +/- 4% which ensures that you will be applying the correct amount of torque to your cap every time. A certificate of calibration is included with your purchase.

Bottling machine equipment

Irregular Caps?

A custom chuck can be machined for your Cap-Rite™ Manual Capper that will tighten irregular caps such as Dropper Caps, Spout Caps, Push-Pull Caps, Sports Caps, and many more.

The Cap-Rite™ Manual Capper includes 2 components:

  • Ergonomic Grip with Integrated Clutch - Designed to fit comfortably in the palm of your hand.

  • Custom Machined Chuck- This chuck is machined to custom fit the features of your cap. The chuck will fit your cap in a similar way to how a socket fits a nut.

A custom machined chuck is required to properly tighten a cap with a Cap-Rite Manual Capper. While standard chucks with urethane chuck inserts (liners) are standard equipment with our powered capping machines, they cannot provide enough gripping power to generate the torque necessary to properly seat a cap being applied manually.

A custom machined chuck is required to properly tighten a cap with a Cap-Rite Manual Capper. While standard chucks with urethane chuck inserts (liners) are standard equipment with our powered capping machines, they cannot provide enough gripping power to generate the torque necessary to properly seat a cap being applied manually.

Capping equipment for bottling

How it Works

  • Place the Cap-Rite™ Manual Capper with attached custom machined chuck onto the cap to be tightened.

  • Turn the Tightening Grip by hand.

  • Upon reaching the specified torque the clutch will release and reset, which signals the operator to proceed to the next cap.

The Capper comes ready to operate. The package price includes an Ergonomic Grip with Integrated Clutch, a custom chuck machined specifically for your cap and an anti-rotation mat.

To Order

  • Choose the Torque Setting - The torque setting of your Cap-Rite Manual Capper will be set, and locked, to your specification. Available torque settings are from 5 - 50 inch.lbs. The torque setting can be selected in 1 inch.lbs. increments.

  • Send Cap and Container Samples - We will need cap and container samples to machine a chuck to custom fit your cap. Please send at least 25 caps and 3 containers to the address at the bottom of this page.

  • Lead Time - Please allow three weeks from when we receive your cap and container samples for your order to ship.

Automatic Bottle Labeling Machines

Neumann Packaging has been working with these machines for years and have had great success with them. The machines are easy to set up, change over, they are robust, reliable, and repeatable.

Tronics are leaders in providing labeling and decorating solutions in North America for over 17 years and has established a reputation for delivering reliable, accurate and flexible automated labeling systems to suit most customer requirements.

Please contact Neumann Packaging for exact pricing.

Bottling machine

Synchronized In-Line Bottle Wrap & Capture

with Orientation Label Applicator

Price varies with application, estimated $33,000

 

Description:

One (1) Stainless Steel "Open Style" Base Module: Robust stainless steel welded tubular construction, non-scuff locking castor wheels and stainless steel leveling feet. The following modules are all fully synchronized assemblies (Unless stated otherwise) that communicate and respond via one control source which are mounted to the base.

One (1) Stainless Steel, Easy to Use Touch Panel Control Cabinet with LCD Display: Swivel mounted; touch panel controller can operate up to two (2) label heads. The controller activates all labeling modules (turns them on/off) and is easily accessible from either side of the base module. Controller can also store up to 100 individual product set-up parameters can be stored and recalled from their individual memory locations at the touch of a button.

One (1) Standard Length, Powder Coated Product Conveyor: 10 Foot Long x 4.5" Wide: Durable table top chain belt, synchronized, stepper motor driven and tool-less adjustable twin bar guide rails and emergency stop controls.

One (1) Non-Synchronized Product Spacing Wheel: (Used when labeling quart containers) Non-synchronized operation, not integrated with labeler. Variable speed controlled through the independent speed controller. A.C motor driven module featuring tool-less set-up adjustments. Spacer module can accommodate a wide variety of container diameter and widths.

One (1) Standard Product Sensor: Used for activating the labeling process.

One (1) Standard Speed, Side Mounted Label Head: Label Head Module includes, 8.5" high label peel plate assembly, standard label gap sensor, 6" label core adaptor, 12" diameter label spool, stepper motor driven backing paper rewind (Re-wind label media speed up to 1,200 inches/min), mounting base with four axis plus angular range of movement, tool-less positional adjustment & quick reference gradient rule set-up shaft. Label placement accuracy +/- 1/32".

One (1) Standard Length, Label Wrap/Drive Module: Max. Label dimensions for labeling round products: 5.5" High x 19" Long. Stepper motor driven wrap belt assembly including label backing/pressure pad for round containers requiring no label orientation. Tool-less adjustment of product heights and quick reference gradient rule set-up shaft. Note: Wrap module also used as a product rotational drive module when using the capture & orientation module stated below

One (1) Pneumatic Round Product Capture Module / Optical Sensor / Gated Indexing & Auto Restart Cycle: Pneumatic capture assembly used to capture a round container and accurately place label(s) (i.e. front & back labels from the same label roll) on the circumference of the container as it is being rotated by the wrap module stated above. Optical sensor used to accurately place a label in a specific reference position [E.g. placing a label in the correct alignment position using a handle, mark or a feature as a reference position on a round container].

Pneumatic gating indexing also included which is used to control product entry on a "one in, one out" basis.

Lead Time

Approximately six (6) to eight (8) weeks from receipt of deposit payment. Please note that some standard configurations are held in stock which may result in reduced lead times.

Delivery & Shipping

An actual delivery will be subject to date that the deposit check, a written purchase order and signed Proposal and Acceptance" is received.

Unless otherwise specified FOB. Freight will be invoiced separately at the customer’s expense and will include a $250 fee for palletizing, packing and stretch wrapping of machine. We highly recommend a "direct" freight delivery from Merrillville (with no depot transfer) to your facility as being safest option to minimize the potential of any accidental damage that could be caused rather a "multi-drop" transportation delivery option.

Payments

60%: Deposit with written Purchase Order and signed "Proposal and Acceptance".

30%: Prior to shipment.

10%: Thirty (30) Days after shipping.

[Special payment terms will also be considered on request plus additional discounting may apply with multiple machine orders]

Credit Card payment is accepted however, any surcharges will be applied to the total cost.

Warranty

Machine Parts*: Twelve (12) months, Labor: Six (6) months, from date of installation.

*Excludes consumable items such as brushes, drive rollers, wrap belts, label head fuse belts, tensioner springs and brake rings. Direct damage caused by willful neglect or accident is also not covered by the terms of the warranty.

Installation

(Invoiced Separately) Your new Tronics In-Line Labeling System(s) (if required) can be professionally installed at your facility by one of our factory trained service technicians. During the installation process, we highly recommend that you select the personnel who will be directly operating the machine to be available for a brief, informal training session.

After Sales Support

A full range of services from spare parts through to prompt machine service response and technical support over the telephone.

Tax

All prices submitted are exclusive of sales tax and any Federal, State, Local taxes, duties, or fees are the responsibility of the customer.

 

Synchronized front back in-line bottle labeling machine. Estimated price $50,000

This front back labeler is to be configured with all modules that will allow you to apply labels to flat sided square/ rectangular and oval shaped containers at labeling rates: TBC (Based on label dimension information).

Why Is Fully Synchronized Operation Important?

The key feature and benefit of a "fully synchronized operating system is to ensure reliable operation and to reduce product set-up time. ALL labeling modules on our system are fully integrated with each other, therefore if one module is adjusted during operation; ALL modules automatically change to suit that adjustment.

This is opposed to a semi-automated operating system where complications could occur if a manual adjustment happens during operation causing a loss to valuable production.

This could result in a complete independent re-set of each separate labeling module’s speed setting, and also the re-positioning of a product sensor that is used to set the label placement timing for each individual product, which all in all can be a time consuming process.

Additional Labeling Modules:

Please note that Series 3 is flexible enough so that you may add on any additional modules whenever the need arises. For example a single or dual timing screw may be added or a label wrap or capture & orientation module depending on the specific requirement opposed to having to purchase a complete new labeling system.

 

Bottle labeling machine

Automatic Bottle Labeling Machines

 

 

 

You get quality service before, during and after the installation of your bottling machinery.