Weigh Filling Machines

• Abrasives
• Sand Blasting
• Walnut Shells
• Bath Salts
• Beans
• Capsules
• Chemicals - Agriculture products

• Coffee ground or whole bean
• Crackers, Croûtons
• Dish Detergent
• Dog food
• Chips
• Flours
• Wheat

• Seeds
• Pet foods
• Pesticides
• Herbs
• Plastic parts
• Computer parts

Features:

• Self-adjusting controller
• Reads out to 1 gram or .001 lb
• Controller range up to 10lbs.
• Supply Hopper cup, 3.5 cu.ft.
• Powder-coated chassis. Stainless steel optional
• All product surfaces stainless steel
• Footprint 4.6 sq.ft., 67" high
• 120V 60Hz (wall outlet); 240V 50Hz option
• Handles any dry bulk from powders to large parts
• Used with any bag or rigid container
• Automatic tare adjustment
• Self-adjusting bulk & dribble speed control
• 600-800 fills/hour

Specifications:

• Overall height: 5'7" (67"), occupies 24" x 28" floor space
• Hopper Size: 24"x 24" (3.5 cu. ft. product capacity)
• Scale Total Weight: 125lbs.
• Standard Funnel Size: 2 1/2 OD
• Power Requirements: 2 amps, 110 volts 60Hz AC
• Air Requirements: <0.25 cfm air supply at 30 psi

Options:

• Fill Spouts
• Dribble Feed Gate
• 240V 50Hz AC
• Stainless Steel Chassis

This dry filling machine will fill free flowing products, bags and containers up to 75 pounds. The product is loaded into the hopper on top of the machine, it is vibrated forward into a bag sitting on the scale the product is weighed on, press the foot switch to start the fill. The process is repeated.

Features:

• Bulk filling for weights of up to 75lbs.
• Self-adjusting controller
• Reads out to .01 lbs.
• Controller range up to 75lbs., 3.5cu.ft. hopper
• All product surfaces Stainless Steel
• Footprint 4.6 sq.ft., 67" high
• 120V 60Hz (wall outlet); 240V 50Hz option
• Handles any dry bulk material from powders to large parts
• Used with any bag or rigid container
• Automatic tare adjustment
• Self-adjusting bulk & dribble speed control
  300-400 fills/hour

Specifications:

• Overall height: 5'7" (67"), occupies only 24" x 30" of floor space
• Hopper Size: 24" x 24" (3.5 cu.ft. product capacity)
• Table Size: 16" wide x 18" deep.
• Table height adjustable to accommodate containers from 3" to 18" high.
• Scale Total Weight: 190 lbs.
• Standard Funnel Opening: 2.5" x 2.5"
• Power Requirement: 2 Amps, 110 Volts 60Hz AC
• Air Requirements: <0.25 cfm air supply at 30psi
• One year limited warranty
  

Options:

• Fill Spouts
• Dribble Feed Gate
• 240V 50Hz AC

The N6 is a weigh filling machine is designed to fill harder to run products such as crackers, chips and other non-free-flowing products. This bag filling machine has a very accurate and easy to use control system.

Features:

• Cascading feed pans
• Self-adjusting controller
• Reads out to 1 gram or .001 lbs.
• Controller range up to 10 lbs.
• Supply hopper 3.5 cu.ft.
• All product surfaces Stainless Steel
• Standard chassis: ◦Powder Coated
• Footprint 7.5 sq.ft., 74.5" high
• 4 locking casters
• 120V, 60Hz (240V, 50Hz option)
• Handles all dry bulk products from powders to large parts
• Compatible with all bags, rigid containers, and bagging machines
• Automatic tare adjustment
• On-the-fly, self-adjusting bulk & dribble speed control
  
• 600-800 fills/hour

Specifications:

• Overall height: 6'3" (75"), occupies only 24" x 48" of floor space
• Hopper Size: 24" x 24" (3.5 cu.ft. product capacity)
• Scale Total Weight: 240 lbs.
• Standard Funnel Size: 2.5"x2.5"
• Power Requirement: 7 Amps, 120 Volts AC 60Hz
• Air Requirements: <0.25 cfm air supply at 30psi
• One year limited warranty

Options:

• Discharge Chute
• Discharge Chute Adopters
• Dribble Feed Gate
• 240V 50Hz AC

A very accurate and easy to use Logical Controller II allows for three different modes of operation. In simultaneous dump the machine fills both weigh hoppers at the same time, allowing for twice as much product flow. In individual dump the machine dumps whichever weigh hopper is at weight. And a mixed filled mode which weighs each product separately.

Features:

• Two lanes for twice the speed
• Self-adjusting controller
• Reads out to 1 gram or .001 lbs.
• Controller range up to 10 lbs.
• 5.1 cu.ft. supply hopper
• All product contact surfaces Stainless Steel
• Standard chassis: ◦Powder Coated
• Footprint 7.5 sq.ft., 74.5" high
• 4 locking casters
• 120V 60Hz (240V 50Hz option)
• Handles all dry bulk products from powders to large parts
• Compatible with all bags, rigid containers, and bagging machines
• Automatic tare adjustment
• On-the-fly, self-adjusting bulk & dribble speed control
• 600-1200 fills/hour

Specifications:

• Overall height: 5'8" (68"), occupies only 30" x 34" of floor space
• Hopper Size: 36" x 24" (5.1 cu.ft. product capacity)
• Scale Total Weight: 225 lbs.
• Standard Funnel Size: 2.5"x2.5"
• Power Requirements: 2 amps, 110 volts 60Hz AC
• Air Requirements: <1.0 cfm air supply at 30psi
• One year limited warranty

Options:

• Fill Spouts
• Divided Supply Hopper
• 240V 50Hz
• Stainless Steel Chassis